Camshaft Specifications
WARNING: This page is about a different car, the 1997 Ford Ranger, 1997 Ford Explorer, 1996 Ford Ranger, and 1996 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
CAMSHAFT
| Application | In. (mm) | |
|---|---|---|
| Camshaft Bearing I.D. | ||
| No. 1 | 1.951-1.952 (49.56-49.58) | |
| No. 2 | 1.937-1.938 (49.20-49.23) | |
| No. 3 | 1.922-1.923 (48.82-48.84) | |
| No. 4 | 1.907-1.908 (48.44-48.46) | |
| End Play | .002-.013 (.051-.318) | |
| Journal Runout | .005 (.13) | |
| Lobe Lift Wear Limit | .005 (.13) | |
| Oil Clearance | ||
| Standard | .0010-.0026 (.025-.066) | |
| Service Limit | .006 (.15) | |
| Valve Lift | .4024 (10.220) | |