LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1996 >> Aerostar Van Window >> Repair and Diagnosis >> External Pages >> Different car >> Section 253 (Front Suspension (4WD)) >> Removal & Installation >> Stabilizer Bar >> Removal & Installation (Ranger)

Removal & Installation (Ranger)

WARNING: This page is about a different car, the 1997 Ford Ranger, 1996 Ford Ranger, and 1996 Ford Bronco. However, it is still accessible from the selected car via links, so may be relevant.

Remove bolts and retainers from center and right end of stabilizer bar. Remove stabilizer bar-to-stabilizer bar link bolt. Remove stabilizer bar and bushings. To install, reverse removal procedure.

scientia non olet · About LEMON Manuals