LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1996 >> Aerostar Van Window >> Repair and Diagnosis >> External Pages >> Different car >> Section 252 (Front Suspension (2WD)) >> Torque Specifications

Torque Specifications

WARNING: This page is about a different car, the 1997 Ford Ranger and 1996 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS

Application Ft. Lbs. (N.m)
ABS Sensor Bolt (1)
Axle Clamp Bolt 50-68 (68-92)
Axle Pivot Bolt (2) 111-148 (150-201)
Axle Pivot Bracket-To-Frame Bolt/Nut 72-98 (98-133)
Axle-To-Radius Arm Bolt 188-254 (255-344)
Ball Joint Stud Nut (3) 89-133 (121-180)
Bumper-To-Spring Seat Bolt 18-26 (24-35)
Coil Spring Retaining Nut 70-100 (95-136)
Lug Nut 100 (136)
Radius Arm Bracket-To-Frame Bolt 82-113 (111-153)
Radius Arm-To-Frame Nut 82-113 (111-153)
Shock Absorber Flange Nut 39-53 (53-72)
Shock Absorber-To-Spring Seat Nut 25-34 (34-46)
Stabilizer Bar Bracket Bolt 30-40 (41-54)
Stabilizer Link-To-Stabilizer Bar Nut 30-44 (41-60)
Tie Rod Nut (3) 22-30 (30-41)
(1) Tighten bolt to 67-93 INCH lbs. (7.6-10.5 N.m).
(2) Tighten to specification with vehicle in normal ride height position and all other fasteners tightened to specification.
(3) Tighten to specification and, if required, advance to next castellation to install cotter pin.