LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1996 >> Aerostar Van Window >> Repair and Diagnosis >> External Pages >> Different car >> Section 252 (Front Suspension (2WD)) >> Removal & Installation >> Camber Adjuster >> Removal

Camber Adjuster: Removal

WARNING: This page is about a different car, the 1997 Ford Ranger and 1996 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.

Remove cotter pin and loosen lower ball joint nut to the end of stud ONLY. Remove upper ball joint camber adjuster clamp bolt from top of axle. Using Ball Joint Remover (D81T-3010-B), remove camber adjuster from upper ball joint stud. See Figure .

scientia non olet · About LEMON Manuals