Section 252 (Front Suspension (2WD)): Description
WARNING: This page is about a different car, the 1997 Ford Ranger and 1996 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
Front suspension is coil spring, twin "I" beam-type. Suspension consists of coil spring, "I" beam axle arms, radius arm, upper and lower ball joint, spindle, tie rod, shock absorber and optional stabilizer bar. One end of each axle is attached to spindle and radius arm assembly. Other end is attached to frame-mounted axle pivot bracket.
Spindle is connected to axle by upper and lower ball joints. Ball joints are sealed and do not require lubrication. Spindle movement is controlled by tie rods and steering linkage.