Wheel Cylinders: Reassembly
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 1997 Ford Pickup, 1997 Ford F-Super Duty, 1997 Ford Cab & Chassis, 1996 Ford Pickup, and 1996 Ford F-Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
If cylinder bore is lightly pitted or scratched, hone or replace as necessary. DO NOT hone cylinders more than.003" (.08 mm). Coat all parts with clean brake fluid. To assemble, reverse disassembly procedure. Clamp brake cylinder pistons against ends of cylinder.