Bleeding Sequence
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 1997 Ford Pickup, 1997 Ford F-Super Duty, 1997 Ford Cab & Chassis, 1996 Ford Pickup, and 1996 Ford F-Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
Before bleeding system, remove all vacuum from power unit by depressing brake pedal several times. Bleed master cylinder first, followed in sequence by rear wheel cylinders, anti-lock system components (if equipped) and calipers. See BLEEDING SEQUENCE table.
BLEEDING SEQUENCE
| Application | Sequence | ||
|---|---|---|---|
| Except Anti-Lock) | RR, LR, RF, LF | ||
| Anti-Lock Brakes | RR, LR, (1), RF, LF | ||
|
|||