LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1996 >> Aerostar Van Window >> Repair and Diagnosis >> External Pages >> Different car >> Section 250 (Disc Brake System & Drum Brake System) >> Bleeding Brake System >> Bleeding Hydro-Boost Unit >> F Super Duty

F Super Duty

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 1997 Ford Pickup, 1997 Ford F-Super Duty, 1997 Ford Cab & Chassis, 1996 Ford Pickup, and 1996 Ford F-Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Fill power steering pump reservoir with Motorcraft MERCON multipurpose automatic transmission fluid. Crank engine several seconds with coil wire disconnected. Check and add fluid if necessary. Start engine. Turn wheels from lock-to-lock twice.
  2. Turn engine off. Depress brake pedal several times to discharge accumulator. Start engine, and turn wheels from lock-to-lock twice. If foaming occurs, stop engine, and allow foam to dissipate. Repeat lock-to-lock procedure until all air is removed from system.