F Super Duty
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 1997 Ford Pickup, 1997 Ford F-Super Duty, 1997 Ford Cab & Chassis, 1996 Ford Pickup, and 1996 Ford F-Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
Remove spring clip and washer from lower end of brake pedal rod. Remove lower end of rod from bellcrank pin. Loosen jam nut. Hold brake pedal against rubber stop. Turn brake rod into clevis until lower hole lines up with pin on bellcrank. Slide brake rod onto pin of bellcrank, and attach washer and spring clip. See Fig 1.