Internal (Concentric) Clutch Slave Cylinder & Release Bearing: Inspection
WARNING: This page is about a different car, the 1996 Ford Ranger, 1996 Ford Pickup, 1996 Ford F-Super Duty, 1996 Ford Explorer, and 1996 Ford Bronco. However, it is still accessible from the selected car via links, so may be relevant.
Check internal (concentric) clutch slave cylinder for leakage. Replace slave cylinder as necessary. Also check slave cylinder for weak spring, worn or damaged piston and worn or damaged boot. Rotate outer race while applying pressure. If bearing rotation is rough, replace clutch release hub and bearing. Check for any surface scoring or burrs that may impede sliding motion of clutch release hub and bearing.