External Clutch Slave Cylinder: Removal
WARNING: This page is about a different car, the 1996 Ford Ranger, 1996 Ford Pickup, 1996 Ford F-Super Duty, 1996 Ford Explorer, and 1996 Ford Bronco. However, it is still accessible from the selected car via links, so may be relevant.
Raise and support vehicle. Push release lever forward to compress clutch slave cylinder. Remove clutch slave cylinder by prying on clip to disengage tangs while pulling clutch slave cylinder free of bracket. Remove clutch release lever dust shield from opening in clutch housing portion of case. Remove clutch release lever by pulling outward.