LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1996 >> Aerostar Van Window >> Repair and Diagnosis >> External Pages >> Different car >> Section 248 (A/C Compressor Servicing) >> PANASONIC Rotary Vane >> Shaft Seal >> Removal & Installation

Removal & Installation

WARNING: This page does not describe the selected car, but rather 27 other vehicles, including the 1995 Mercury Villager, 1995 Mercury Tracer, 1995 Mercury Sable, 1995 Mercury Mystique, and 1995 Mercury Grand Marquis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove compressor clutch assembly. Using scribe or small screwdriver, remove compressor shaft felt dust seal. Use Remover/Installer (T92C-19623-AH) to remove compressor shaft seal.
  2. Using Remover/Installer (T92C-19623-BH), carefully remove compressor shaft seal. Inspect compressor shaft for scratches or score marks. Repair or replace compressor as necessary. To install, reverse removal procedure.
Fig 1: Exploded View Of Compressor (Panasonic Rotary Vane)
G93F28410Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals