LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1996 >> Aerostar Van Window >> Repair and Diagnosis >> External Pages >> Different car >> Section 248 (A/C Compressor Servicing) >> NIPPONDENSO 10P13 & 10P15F 10-Cylinder >> Clutch Assembly >> Removal

Clutch Assembly: Removal

WARNING: This page does not describe the selected car, but rather 27 other vehicles, including the 1995 Mercury Villager, 1995 Mercury Tracer, 1995 Mercury Sable, 1995 Mercury Mystique, and 1995 Mercury Grand Marquis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using Spanner (1014 on 10P13 or T81P-19623-MH on 10P15C and 10P15F), hold clutch plate and remove compressor shaft nut. Using Clutch Plate Remover (T80L-19703-B), pull clutch plate from compressor. Remove clutch plate shims.
  2. Remove snap ring and clutch pulley assembly. If pulley assembly cannot be removed by hand, use Shaft Protector (T80L-19703-G) and 3-jaw puller. Remove snap ring. Disconnect clutch coil lead, and remove clutch coil.
scientia non olet · About LEMON Manuals