Complete System Reactivation
WARNING: This page is about a different car, the 1996 Ford Ranger and 1996 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect negative and positive battery cables. Remove air bag simulator from clockspring connector. Remove air bag simulator from passenger-side air bag vehicle harness connector. Install driver-side air bag module. See DRIVER-SIDE AIR BAG MODULE under REMOVAL & INSTALLATION.
- Install passenger-side air bag module. See PASSENGER-SIDE AIR BAG MODULE under REMOVAL & INSTALLATION. Reconnect positive and negative battery cables. System is now reactivated. Perform system operation check to ensure SRS is functioning properly. See SYSTEM OPERATION CHECK .