Steering Wheel R & I: Removal
WARNING: This page is about a different car, the 1995 Ford Pickup, 1995 Ford F-Super Duty, 1995 Ford Cab & Chassis, and 1995 Ford Bronco. However, it is still accessible from the selected car via links, so may be relevant.
- Center the front wheels to a straight-ahead position. Before proceeding, read and understand all air bag service precautions. Refer to SERVICE PRECAUTIONS . Disable the air bag system. Refer to DISABLING & ACTIVATING AIR BAG SYSTEM . Remove air bag module from steering wheel. See DRIVER-SIDE AIR BAG MODULE R & I under REMOVAL & INSTALLATION.
- Disconnect speed control wiring harness (if equipped) from steering wheel. Remove steering wheel retaining bolt. Mark steering wheel hub and steering shaft for installation reference. Using Steering Wheel Puller (T67L-3600-A), remove steering wheel. Route clockspring (contact assembly) wiring harness through steering wheel as wheel is lifted from steering shaft.