Right Front Impact Sensor R & I: Installation
WARNING: This page is about a different car, the 1995 Ford Pickup, 1995 Ford F-Super Duty, 1995 Ford Cab & Chassis, and 1995 Ford Bronco. However, it is still accessible from the selected car via links, so may be relevant.
Install sensor and secure with retaining screws. Tighten retaining screws to specification. See TORQUE SPECIFICATIONS . If proper torque cannot be achieved, replace stripped screw with screw (N802455-S190). To complete installation, reverse removal procedure. Activate air bag system. Check AIR BAG warning light to ensure system is functioning properly. See SYSTEM OPERATION CHECK .