Removal & Installation (Fuel Line Coupler)
WARNING: This page is about a different car, the 1997 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
- Disengage locking tabs on connector retainer. Separate retainer halves. Disengage fitting from regulator by pushing fitting toward regulator and inserting Fuel Line Coupling Key (T90P-9550-A). See Fig 1 .
- To reconnect fuel line coupling, push coupler tube assembly firmly into coupler body recess until fully engaged. Pull gently on both ends of coupler to ensure engagement. See FUEL SUPPLY MANIFOLD .