LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1996 >> Aerostar Van Window >> Repair and Diagnosis >> External Pages >> Different car >> Section 240 (Engine Controls - Removal & Installation & Overhaul - 4.0L) >> Fuel System >> Upper Intake Manifold >> Installation

Upper Intake Manifold: Installation

WARNING: This page is about a different car, the 1997 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.

Clean and inspect mounting surfaces. Position NEW gasket on mounting studs. Install upper intake manifold, and tighten bolts to specification. See TORQUE SPECIFICATIONS  . To complete installation, reverse removal procedure.

scientia non olet · About LEMON Manuals