CMP Synchronizer: Notes

WARNING: This page is about a different car, the 1997 Ford Aerostar. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: Synchro Positioner (T95T-12200-A) is required to properly install synchronizer. See Figure . Failure to use synchro positioner during installation will cause fuel injection to be out of time and may cause engine damage.

CAUTION: DO NOT rotate crankshaft when Synchro Positioner (T95T-12200-A) is positioned on CMP synchronizer. Armature tab will be damaged and synchronizer timing may be shifted.