LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1996 >> Aerostar Van Window >> Repair and Diagnosis >> External Pages >> Different car >> Section 238 (Engine Controls - Remove/Install/Overhaul - 3.0L) >> Fuel System >> Upper Intake Manifold & Throttle Body >> Removal

Upper Intake Manifold & Throttle Body: Removal

WARNING: This page is about a different car, the 1997 Ford Aerostar. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect negative battery cable. Remove air cleaner duct hose. Remove throttle linkage shield and disconnect linkage. Mark and disconnect vacuum hoses from throttle body. Mark and disconnect electrical connectors.
  2. Disconnect PCV hose. Remove generator support brace. Remove 6 upper intake manifold assembly bolts. Remove upper intake manifold assembly and gasket.
scientia non olet · About LEMON Manuals