LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1996 >> Aerostar Van Window >> Repair and Diagnosis >> External Pages >> Different car >> Section 236 (Engine Controls - Remove/Install/Overhaul - 3.0L) >> Fuel System >> Fuel Supply Manifold Assembly >> Installation

Fuel Supply Manifold Assembly: Installation

WARNING: This page is about a different car, the 1996 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.

Lubricate NEW injector "O" rings with light oil. DO NOT use silicone grease. Carefully install fuel supply manifold and injectors into lower manifold, one side at a time. To complete installation, reverse removal procedure.

scientia non olet · About LEMON Manuals