Removal & Installation
WARNING: This page does not describe the selected car, but rather 28 other vehicles, including the 1998 Ford RV Cutaway, 1998 Ford Econoline, 1998 Ford Cutaway, 1998 Ford Club Wagon, and 1997 Ford RV Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
Disconnect Engine Oil Temperature (EOT) sensor electrical connector. EOT is located on top, front of engine. Remove one quart of engine oil from high pressure oil pump reservoir using Rotunda Vacuum Tester (014-R1058). Remove engine oil temperature sensor. To install, reverse removal procedure.