Removal & Installation
WARNING: This page does not describe the selected car, but rather 28 other vehicles, including the 1998 Ford RV Cutaway, 1998 Ford Econoline, 1998 Ford Cutaway, 1998 Ford Club Wagon, and 1997 Ford RV Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
Disconnect wiring from injector control pressure solenoid. Remove nut securing injection control pressure solenoid to pressure regulator. Remove pressure regulator from high pressure oil pump. See Fig 1. To install, reverse removal procedure. Tighten pressure regulator to specification. See TORQUE SPECIFICATIONS .