High Pressure Oil Pump: Installation
WARNING: This page does not describe the selected car, but rather 28 other vehicles, including the 1998 Ford RV Cutaway, 1998 Ford Econoline, 1998 Ford Cutaway, 1998 Ford Club Wagon, and 1997 Ford RV Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
- Install high pressure oil pump with gasket. Install mounting bolts and tighten to specification. See TORQUE SPECIFICATIONS . Install drive sprocket on high pressure oil pump shaft. Before tightening drive sprocket bolt, ensure sprocket is fully seated on pump shaft.
- Apply RTV sealer to access cover before installing. Reinstall pressure regulator. To complete installation, reverse removal procedure. Refill high pressure oil pump reservoir with clean engine oil. Tighten bolts to specification. See TORQUE SPECIFICATIONS .