Removal & Installation
WARNING: This page does not describe the selected car, but rather 28 other vehicles, including the 1998 Ford RV Cutaway, 1998 Ford Econoline, 1998 Ford Cutaway, 1998 Ford Club Wagon, and 1997 Ford RV Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
Disconnect negative battery cable. Loosen PCM connector retaining bolt (if equipped). Unplug harness connector from PCM. Remove 2 PCM mounting bolts. Remove PCM cover and PCM. On pickup, removal of fender liner may be necessary to slide PCM out. On all vehicles, to install, reverse removal procedure.
PCM LOCATIONS
| Model | Location |
|---|---|
| Econoline | Left/Rear Of Engine Compartment, Right Of Power Brake Booster |
| Pickup | Left/Rear Of Engine Compartment, Left Of Power Brake Booster |