LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1996 >> Aerostar Van Window >> Repair and Diagnosis >> External Pages >> Different car >> Section 234 (Engine Controls - Removal & Installation & Overhaul - 4.0L) >> Emission Systems & Sub-Systems >> EGR Valve >> Removal & Installation

Removal & Installation

WARNING: This page is about a different car, the 1996 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the vacuum hose from the EGR valve. Disconnect the EGR valve to exhaust manifold tube from the EGR valve. Remove the EGR valve bolts and the EGR valve. Remove the EGR valve gasket and clean gasket sealing surface. If the old EGR valve is to be installed, clean the gasket sealing surface. To install, reverse removal procedure.

scientia non olet · About LEMON Manuals