LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1996 >> Aerostar Van Window >> Repair and Diagnosis >> External Pages >> Different car >> Section 228 (HVAC System - A/C-Heater System - Automatic) >> Removal & Installation >> Temperature Sensors >> Removal & Installation (Ambient)

Removal & Installation (Ambient)

WARNING: This page is about a different car, the 1996 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect negative battery cable. Remove sensor nut and sensor, located in front of condenser core. Unplug electrical connector, and remove sensor. To install, reverse removal procedure.

scientia non olet · About LEMON Manuals