LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1996 >> Aerostar Van Window >> Repair and Diagnosis >> External Pages >> Different car >> Section 227 (HVAC System - A/C-Heater System - Manual) >> Removal & Installation >> Clutch Cycling Pressure Switch >> Installation

Clutch Cycling Pressure Switch: Installation

WARNING: This page is about a different car, the 1996 Ford Ranger and 1996 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.

Lubricate new "O" ring with clean refrigerant oil. Screw pressure switch into accumulator, and tighten switch. Connect harness connector to switch, and check operation.

scientia non olet · About LEMON Manuals