Blower Motor & Fan: Removal
WARNING: This page is about a different car, the 1996 Ford Ranger and 1996 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect negative battery cable. Press down on tab, and pull wire harness connector from blower motor. Remove air cleaner. Remove solenoid box cover (forward of blower motor).
- Disconnect blower motor cooling tube from blower motor, and remove 3 blower motor mounting plate attaching screws. Remove blower motor and wheel from evaporator assembly. See Figure. Remove attaching spring clamp and blower wheel.