LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1996 >> Aerostar Van Window >> Repair and Diagnosis >> External Pages >> Different car >> Section 227 (HVAC System - A/C-Heater System - Manual) >> A/C System Specifications

A/C System Specifications

WARNING: This page is about a different car, the 1996 Ford Ranger and 1996 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: To avoid injury from accidental air bag deployment, read and carefully follow all SERVICE PRECAUTIONS and DISABLING & ACTIVATING AIR BAG SYSTEM procedures in the AIR BAG RESTRAINT SYSTEM article in the ACCESSORIES/SAFETY EQUIPMENT section.
A/C SYSTEM SPECIFICATIONS

Application Specification
Compressor Type Ford FS-10 10-Cyl.
Compressor Belt Tension (1)
System Oil Capacity (2) 7 ozs.
Refrigerant (R-134a) Capacity
Explorer 26 ozs.
Ranger 22 ozs.
System Operating Pressures (3)
Low Side 22-50 psi (1.5-3.5 kg/cm2 )
High Side 160-250 psi (11.2-17.6 kg/cm2 )
(1) Serpentine belt tension is automatically adjusted by tensioner pulley.
(2) Use PAG YN-12b oil (Part No. F2AZ-19577).
(3) Approximate operating pressures with ambient temperature of 80°F (27°C).
scientia non olet · About LEMON Manuals