Pinpoint Test T: Fuel Delivery Command Signal: Description
WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 1996 Ford RV Cutaway, 1996 Ford Pickup, 1996 Ford F-Super Duty, 1996 Ford Econoline, and 1996 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
Perform this test when directed here by QUICK TEST . FDCS controls fuel injection timing and controls fuel quantity with Injection Pressure Regulator (IPR). This signal is sent with Cylinder Identification (CID) signal to Injector Driver Module (IDM) which provides power and distributes proper signal to appropriate injector. DTC 1663 indicates FDCS circuit failure.
This pinpoint test is intended to diagnose:
- Injector Driver Module (IDM).
- Wiring harness circuit; (FDCS).
- Powertrain Control Module (PCM).