Blower Motor & Fan: Removal
WARNING: This page is about a different car, the 1995 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect negative battery cable. Disconnect wiring harness connector from blower motor by pressing down on tab while pulling connector from motor. Remove air cleaner. Remove solenoid box cover (forward of blower motor).
- Disconnect blower motor cooling tube from blower motor, and remove 3 blower motor mounting plate attaching screws. Remove blower motor and wheel from evaporator assembly. See Figure. Remove attaching spring clamp and blower wheel.