Thermostatic Expansion Valve (TXV): Installation
WARNING: This page is about a different car, the 1995 Ford RV Cutaway, 1995 Ford Econoline, 1995 Ford Cutaway, and 1995 Ford Club Wagon. However, it is still accessible from the selected car via links, so may be relevant.
To install, reverse removal procedure. Use new "O" rings lubricated with clean PAG refrigerant oil. Evacuate, recharge and leak test system. Ensure cover seal is positioned correctly to prevent air leakage. Tighten bench seat bolts to 25-45 ft. lbs. (34-61 N.m).