Removal & Installation: Accumulator-Drier: Installation

WARNING: This page is about a different car, the 1995 Ford Pickup, 1995 Ford F-Super Duty, 1995 Ford Cab & Chassis, and 1995 Ford Bronco. However, it is still accessible from the selected car via links, so may be relevant.

To install, reverse removal procedure. Use new "O" ring lubricated with clean PAG refrigerant oil. Evacuate, recharge and leak test system. Check system for proper operation.

Fig 1: Exploded View Of A/C Evaporator Assembly

Courtesy of FORD MOTOR CO.