Fuel Injector Resistance
WARNING: This page is about a different car, the 1995 Ford Ranger, 1995 Ford Explorer, and 1995 Ford Aerostar. However, it is still accessible from the selected car via links, so may be relevant.
Disconnect injector harness connectors. Using digital ohmmeter, measure resistance between injector terminals. See INDIVIDUAL INJECTOR RESISTANCE table. Replace any injector not within specification.
NOTE:
For additional testing and information for Aerostar and Explorer, see FUEL SYSTEM in SYSTEM/COMPONENT TESTS - EEC-IV (4.0L)
article. For additional testing information for Ranger, see TESTS W/CODES - EEC-V (4.0L)
.
INDIVIDUAL INJECTOR RESISTANCE (1)
| Engine | Ohms | ||
|---|---|---|---|
| 4.0L | 11-18 | ||
|
|||