LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1996 >> Aerostar Van Window >> Repair and Diagnosis >> External Pages >> Different car >> Section 156 (7.3L V8 Diesel - VIN [F]) >> Removal & Installation >> Engine Front Cover >> Installation

Engine Front Cover: Installation

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 1995 Ford RV Cutaway, 1995 Ford Pickup, 1995 Ford F-Super Duty, 1995 Ford Econoline, and 1995 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Clean gasket surfaces of engine block, oil pan, engine front cover and water pump. Install 2 NEW engine front cover gaskets and apply silicone sealer to engine front cover sealing grooves.
  2. Install engine front cover and tighten bolts finger tight. Install water pump. See WATER PUMP . Tighten engine front cover bolts to specification. See TORQUE SPECIFICATIONS . Install oil pump screen cover and tube. Install oil pan. See OIL PAN .
  3. Apply silicone sealer to crankshaft keyway. Using Driver/Puller Screw (T79T-6316-A1), Driver Sleeve (T79T-6316-A4) and Thread Adapter (T94T-6379-AH3), install crankshaft damper. Install crankshaft pulley, crankshaft pulley bolt and washer. Tighten crankshaft pulley bolt to specification. To complete installation, reverse removal procedure.
scientia non olet · About LEMON Manuals