Crankshaft Rear Oil Seal: Removal
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 1995 Ford RV Cutaway, 1995 Ford Pickup, 1995 Ford F-Super Duty, 1995 Ford Econoline, and 1995 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
- Remove transmission. Remove clutch assembly (if equipped). Remove flywheel/flexplate. Remove 5 crankshaft rear oil seal retaining bolts and remove crankshaft rear oil seal. Clean crankshaft rear oil seal surfaces.
- Inspect crankshaft wear sleeve for wear and/or damage and replace if necessary. Remove crankshaft wear sleeve if necessary using Crankshaft Wear Ring Remover (T94T-6701-AH), Forcing Screw (T84T-7025-B), Remover Tube (T77J-7025-B) and Crankshaft Wear Ring Remover Sleeve (T94T-6701-AH2).