Camshaft Bearings: Installation
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 1995 Ford RV Cutaway, 1995 Ford Pickup, 1995 Ford F-Super Duty, 1995 Ford Econoline, and 1995 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
- Install camshaft bearings using Camshaft Bearing Remover/Installer (T65L-6250-A). Ensure bearing oil holes are properly aligned with oil holes in cylinder block.
- Install front bearing.020-.050" (.51-1.27 mm) below front face of cylinder block. Check bearing installation with straightedge and feeler gauge. Install NEW cylinder block camshaft core plug. To complete installation, reverse removal procedure.