LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1996 >> Aerostar Van Window >> Repair and Diagnosis >> External Pages >> Different car >> Section 156 (7.3L V8 Diesel - VIN [F]) >> Overhaul >> Cylinder Head >> Valve Seat

Valve Seat

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 1995 Ford RV Cutaway, 1995 Ford Pickup, 1995 Ford F-Super Duty, 1995 Ford Econoline, and 1995 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. If seat width is too wide after grinding, use a 15-degree stone to lower seat or a 60-degree stone to raise seat. Refer to CYLINDER HEAD  table under ENGINE SPECIFICATIONS.
  2. Ensure valve seat angle, seat width and seat runout are within specification. See CYLINDER HEAD  table. Valve seats must be ground when valve is refaced or replaced.
scientia non olet · About LEMON Manuals