Cylinder Block Specifications

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 1995 Ford RV Cutaway, 1995 Ford Pickup, 1995 Ford F-Super Duty, 1995 Ford Econoline, and 1995 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.

CYLINDER BLOCK

Application

In. (mm)

Cylinder Bore

Standard Diameter

4.1096-4.1103 (104.384-104.402)

Maximum Out-Of-Round

.0005 (.013)

Maximum Taper

.0005 (.013)

Maximum Deck Warpage ⁽¹⁾

.003 (.08)

⁽¹⁾	Specification is within a 6" (152.4 mm) area. Overall warpage is.006" (.15 mm). DO NOT machine cylinder block deck surface. If deck warpage exceeds specification, resurface cylinder block.