Crankshaft Main & Connecting Rod Bearings Specifications
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 1995 Ford RV Cutaway, 1995 Ford Pickup, 1995 Ford F-Super Duty, 1995 Ford Econoline, and 1995 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
CRANKSHAFT MAIN & CONNECTING ROD BEARINGS
| Application | In. (mm) | ||||
|---|---|---|---|---|---|
| Crankshaft | |||||
| End Play | |||||
| Standard | .0025-.0085 (.064-.216) | ||||
| Wear Limit | .020 (.51) | ||||
| Main Bearings | |||||
| Journal Diameter | 3.1228-3.1236 (79.319-79.339) | ||||
| Journal Out-Of-Round | .0002 (.005) | ||||
| Journal Taper (1) | .00015 (.0038) | ||||
| Runout (Maximum) | .001 (.025) | ||||
| Oil Clearance | |||||
| Desired | .0018-.0036 (.046-.091) | ||||
| Allowable | .0018-.0046 (.046-.117) | ||||
| Connecting Rod Bearings | |||||
| Journal Diameter | 2.4980-2.4990 (63.450-63.475) | ||||
| Journal Out-Of-Round | .0005 (.013) | ||||
| Journal Taper (1) | .0005 (.013) | ||||
| Oil Clearance | |||||
| Desired | .0015-.0045 (.038-.114) | ||||
| Allowable | .0011-.0036 (.028-.091) | ||||
|
|||||