LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1996 >> Aerostar Van Window >> Repair and Diagnosis >> External Pages >> Different car >> Section 153 (3.8L V6 - VIN [4]) >> Removal & Installation >> Exhaust Manifold >> Installation

Exhaust Manifold: Installation

WARNING: This page is about a different car, the 1995 Ford Windstar. However, it is still accessible from the selected car via links, so may be relevant.

To install, reverse removal procedure. Lightly oil all bolt and stud threads before installing. A slight warpage, causing misalignment, may be corrected by elongating bolt holes as necessary. DO NOT  elongate lower front bolt hole on cylinder No. 5. Tighten bolts to specification. See TORQUE SPECIFICATIONS  .



To install, reverse removal procedure. Lightly oil all bolt and stud threads before installing. A slight warpage, causing misalignment, may be corrected by elongating bolt holes as necessary. DO NOT  elongate lower rear bolt hole on cylinder No. 2. Tighten bolts to specification. See TORQUE SPECIFICATIONS  .

scientia non olet · About LEMON Manuals