LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1996 >> Aerostar Van Window >> Repair and Diagnosis >> External Pages >> Different car >> Section 153 (3.8L V6 - VIN [4]) >> Removal & Installation >> Crankshaft Rear Oil Seal >> Removal

Crankshaft Rear Oil Seal: Removal

WARNING: This page is about a different car, the 1995 Ford Windstar. However, it is still accessible from the selected car via links, so may be relevant.

Rear main bearing oil seal is a one-piece seal. Remove transmission or transaxle. See TRANSMISSION REMOVAL & INSTALLATION article under TRANSMISSION SERVICING. Remove flexplate/flywheel. Punch hole in metal portion of seal with an awl. Remove seal with a slide hammer.

scientia non olet · About LEMON Manuals