LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1996 >> Aerostar Van Window >> Repair and Diagnosis >> External Pages >> Different car >> Section 153 (3.8L V6 - VIN [4]) >> Removal & Installation >> Crankshaft Front Oil Seal >> Installation

Crankshaft Front Oil Seal: Installation

WARNING: This page is about a different car, the 1995 Ford Windstar. However, it is still accessible from the selected car via links, so may be relevant.
  1. Lubricate seal and sealing surfaces with engine oil. Using Seal Installer (T82L-6316-A and T70P-6B070-A), install seal.
  2. Coat seal surface of vibration damper with engine oil. Using Vibration Damper Seal Replacer (T82L-6316-A), install vibration damper.
  3. To complete installation, reverse removal procedure. Tighten bolts to specification. See TORQUE SPECIFICATIONS  . Ensure reference marks align on crankshaft pulley and vibration damper.
scientia non olet · About LEMON Manuals