Balance Shaft: Inspection
WARNING: This page is about a different car, the 1995 Ford Windstar. However, it is still accessible from the selected car via links, so may be relevant.
Inspect components for damage. Measure balance shaft journal O.D. and runout. Replace components if damaged or not within specification. See the BALANCE SHAFT SPECIFICATIONS table.
BALANCE SHAFT SPECIFICATIONS
| Application | In. (mm) |
|---|---|
| End Play | .003-.008 (.08-.20) |
| Journal O.D. | 2.0505-2.0515 (52.083-52.108) |
| Runout | .001 (.03) |