Valves & Valve Springs Specifications
WARNING: This page is about a different car, the 1995 Ford Windstar. However, it is still accessible from the selected car via links, so may be relevant.
VALVES & VALVE SPRINGS
| Application | In. (mm) | ||||
|---|---|---|---|---|---|
| Intake Valves | |||||
| Face Angle | 45.8° | ||||
| Head Diameter | 1.78 (45.2) | ||||
| Minimum Margin | .031 (.79) | ||||
| Stem Diameter | .3415-.3423 (8.674-8.694) | ||||
| Valve Face Runout | .002 (.05) | ||||
| Exhaust Valves | |||||
| Face Angle | 45.8° | ||||
| Head Diameter | 1.46 (37.1) | ||||
| Minimum Margin | .031 (.79) | ||||
| Stem Diameter | .3410-.3418 (8.661-8.682) | ||||
| Valve Face Runout | .002 (.05) | ||||
| Valve Springs | |||||
| Installed Height | 1.97 (50.0) | ||||
| Pressure (1) | |||||
| Valve Closed | 85 @ 1.65 (38 @ 41.9) | ||||
| Valve Open | 220 @ 1.18 (99 @ 29.9) | ||||
|
|||||