Removal (Upper)
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 1995 Ford RV Cutaway, 1995 Ford Pickup, 1995 Ford F-Super Duty, 1995 Ford Econoline, and 1995 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect negative battery cable. Remove air cleaner intake duct. On Van, remove oil fill tube and engine cover. Disconnect throttle and A/T linkage (if equipped) from throttle body. Remove 2 bracket-to-intake manifold bolts. Move bracket and cables aside.
- Disconnect electrical connectors and upper manifold vacuum hose connections as necessary. Disconnect EGR and PCV systems. Disconnect clean air supply hose of idle by-pass valve. Remove 4 upper intake manifold bolts. Remove upper intake manifold and throttle body as an assembly.