Hydraulic Valve Lifters: Removal
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 1995 Ford RV Cutaway, 1995 Ford Pickup, 1995 Ford F-Super Duty, 1995 Ford Econoline, and 1995 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
- Remove upper and lower intake manifolds. See, in this article, INTAKE MANIFOLDS . Remove valve covers. Loosen rocker arm fulcrum bolts and turn to one side.
- Mark location for installation reference and remove push rods. Mark lifter location for installation reference. Remove valve lifters with a magnet. If lifters are stuck in bores, use Hydraulic Lifter Puller (T70L-6500-A).