Front Crankshaft Oil Seal: Removal
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 1995 Ford RV Cutaway, 1995 Ford Pickup, 1995 Ford F-Super Duty, 1995 Ford Econoline, and 1995 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
Remove radiator fan shroud, fan and spacer. Remove drive belts. Remove crankshaft pulley. Using Crankshaft Damper Remover (T58P-6316-D), remove crankshaft vibration damper. Place Seal Remover (T70P-6B070-B) onto timing chain cover plate over front seal. Tighten 2 through-bolts, forcing seal remover under seal flange. Alternately tighten 4 puller bolts, one-half turn at a time, until seal is removed from engine.