Exhaust Manifold: Installation
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 1995 Ford RV Cutaway, 1995 Ford Pickup, 1995 Ford F-Super Duty, 1995 Ford Econoline, and 1995 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
- Inspect manifold(s) for cracks, damaged sealing surfaces, or other wear or damage. Replace manifold(s) as necessary. Clean cylinder head and manifold mating surfaces.
- Clean mounting flange of manifold and exhaust pipe. Apply light film of graphite grease to manifold-machined surface. Position spark plug wire heat shields and exhaust manifold on cylinder head.
- Install attaching bolts and washers, starting at fourth bolt hole from front of each manifold. Tighten bolts to specification, starting at center and working outward. See TORQUE SPECIFICATIONS .